UV-curable UV-LED adhesives for horn (speaker) diaphragm magnetic head coil and other components must meet the following requirements: 1. UV-LED adhesives in any state should be liquid in coating; 2. The surface of the adhesives can be full

UVLED cures UV glue. If the wavelength is matched, the effect is quite good. It can be cured in 5 seconds. In the electronics industry, UVLED is replacing UV mercury lamps on a large scale. Compared with UV mercury lamps, UVLEDs are more en

The produced UVLED surface light source chiller has two working modes of constant temperature and intelligent temperature adjustment. The type of chiller is compact in structure, compact in volume and easy to move. In the output control equipment

he uvled point source has two structures: one is the controller and the other is the Irradiation head.The specifications of the uvled point source Irradiation head are divided into four categories:

1. Ultraviolet curing principle: Ultraviolet (UV) curing is the use of photoinitiator (photosensitizer) photoinitiator (photosensitizer) photoinitiation under ultraviolet light to form exciting ecological molecules, decompose into free radicals or ion

　The uniform distribution of the uvled surface light source, most of which are optimized by UV irradiation and professional lens combination, the uvled surface light source is more uniform, and the illumination intensity at the edge and center will

　At present, most domestic manufacturers still use traditional ultraviolet mercury lamps to work, but UV LEDs will eventually replace mercury lamps, because its advantages are much more than traditional mercury lamps! 1. Long life: The service

The promotion and use of UV inks has greatly solved the problem of high-quality printing of high-speed printing of thermal printing paper and other special printing materials. However, due to the different properties of the materials themse