What are the advantages of uvled curing equipment?
At present, most domestic manufacturers still use traditional ultraviolet mercury lamps to work, but UV LEDs will eventually replace mercury lamps, because its advantages are much more than traditional mercury lamps!
1. Long life: The service life is more than 10 times that of the traditional mercury lamp curing machine, about 20,000 to 30,000 hours.
2. Cold light source, no heat radiation, low surface temperature of the subject product, solving the problem of long-term thermal damage in optical communication and liquid crystal production. It is especially suitable for liquid crystal edge sealing, film printing, etc. where small temperature rise is required.
3, the low calorific value can solve the problem that the mercury lamp spraying equipment has high calorific value and is unbearable for personnel.
4. Instant lighting, 100% power uv output can be realized immediately without preheating.
5. The service life is not affected by the number of opening and closing times.
6. High energy, stable light output, good radiation uniformity, and improved production efficiency.
7. The effective irradiation area can be customized and the length ranges from 20mm to 1000mm.
8. No mercury or ozone is produced. It is a safe, environmentally friendly alternative to traditional light source technology.
9. Low energy consumption, power consumption is only 10% of the traditional mercury lamp curing machine, and can save 90%.
10. Maintenance costs are almost zero, using UVLED curing equipment can save at least 10,000 yuan per unit of consumables per year.
11. In the printing process, the switch operation of the UV LED lamp can be freely opened, opened when needed, and turned off when not needed, which can greatly save energy and reduce cost.
12, the traditional uvled light curing machine must use the lens, that is, increase the cost, make the light angle smaller, more light beads will appear uneven.
