Characteristic of UV LED Curing Machine for Communication Op

UV LED Curing Machine for Communication Optical Fiber

 

 

 

At present, UV LED curing machine is widely used in industry, among which UV LED curing machine is used in communication optical fibers. Communication fiber is composed of core, cladding and coating. The peeling force of communication optical fiber coating is determined by the external coating of the optical fiber; the pulling force of the coating, that is, the bonding force between the inner coating of the optical fiber and the quartz glass coating, depends on the inner coating of the optical fiber. These coatings all need to use UVLED, and compared with UV mercury lamp, UVLED has lower heat and more pure ultraviolet light, which not only greatly improves the curing speed, but also adapts well to thermal sensitive materials.

 

 

 

Performance characteristics

 

 

 

The advantages of UV LED curing machine for communication optical fibers are as follows:

 

 

 

1. Long service life: > 20.000 hours, simple maintenance

 

 

 

2. High-performance LED chip module: stable light output, good uniformity, high curing efficiency

 

 

 

3. High light intensity: the highest irradiation intensity is 1200 mw/cm_

 

 

 

4. Instant Switch: Without waiting, the set power output (1-100%) can be achieved instantly.

 

 

 

5. Intelligent operation: touch screen operation, equipped with I/O interface

 

 

 

6. High safety factor: with high temperature protection, chip self-protection, cumulative use time, fault alarm and other functions

 

 

 

7. Environmental protection and energy saving: cold light source, no heat radiation, heavy metals and other harmful substances, to ensure safety, environmental protection and energy saving

 

 

 

Futansi produces UV LED point light source, UV LED line light source, UV LED surface light source, UV LED tunnel furnace