UV Curing Machine for Medical Consumables Adhesion

Medical consumables pasting UV curing operation:

 

 

 

1. Apply the UV glue evenly on the outside of one component, then close the other component, place it on the shelf and wait for UV curing. When operating, it should not press hard and rub repeatedly where it needs to be bonded. If the assembled product is easy to move and slide after gluing, it can be pre-fixed with 8-15S illuminated by black lamp tube and then cured by UV light, which can reduce the rate of poor assembly.

 

 

 

2. UV Curing

 

 

 

Place the bonded components evenly on the surface of the curing machine, close the curing machine (to prevent light leakage), and turn on the UV curing machine. When illuminating, it is necessary to go from the center to the periphery, and confirm that the light can penetrate the bonding part, illuminate about 6S, locate initially, and then re-illuminate the remaining glue on the component until it is completely cured.

 

 

 

Attention: Temperature also has a slight effect on the activity of glue. Curing time should be prolonged properly when temperature is low. When plastics are bonded, the content of ultraviolet absorbent in plastics should be taken into account. Higher content will seriously affect the transmittance of ultraviolet rays, thus having a significant impact on the curing efficiency of glue, even leading to the glue can not be cured.

 

 

 

3. The mode of occurrence of ultraviolet (UV).

 

 

 

UV curing machine, the current industrial use of UV equipment used in the light source is mainly gas discharge lamp (mercury lamp). According to the pressure of the gas in the inner chamber of the lamp is low, medium, high and ultra-high, we use the UV LED curing machine with LED chip as the light emitting body. It has the characteristics of high efficiency, energy saving, environmental protection and long service life.

 

Futansi produces 4-channel UV LED point light source, 4-channel UV LED curing machine, 4-channel UV LED light source and 8-channel UV LED point light source.