At present, UVLED curing oven has been widely used in PCB, LCD, electronics, printing, plastic, wood, footwear, glass, handicraft polishing, painting and other fields. Many manufacturers have replaced the original UV mercury lamp production

Generally speaking, this is caused by oxygen blocking. Oxygen in the air is the enemy of most UV glues. On the surface of oxygen, UV adhesive seems to be difficult to cure completely. There are several ways to weaken or remove the influence

UV LED curing equipment is also used for 3D printing. With the development of science and technology, 3D printing, which was previously seemingly impossible, has gradually matured and applied more widely. In order to pursue faster and lower

Miniature loudspeakers generally include sound film, voice coil, basin frame, magnetic pole, magnetic core, magnetic cylinder, etc. All these small parts are assembled with glue. A small microspeaker sometimes uses as much as eight glues. U

What is Capacitance Jet Code The printer is a non-contact ink-jet marking system controlled by a single chip computer. By controlling the internal gear pump or supplying compressed gas from the outside of the machine, a certain pressure is

Because the UV-LED linear light source is different from the scattering light emitted by mercury lamp, the UV light emitted by UMLED linear light source is narrow linear light, the energy is more concentrated, the radiation intensity is hig

There are several parts of UVLED adhesive, including sound film, sound film viscose bracket, steel cord, wire fixation, magnetic viscous magnetic bottle. At present, the combination of micro-speaker is the most effective way to use the prin

LED UV light source irradiator does not need lamp tube preheating and does not contain toxic mercury. Compared with the traditional irradiation mode, the power consumption of the irradiator is several hundred watts, even thousands of watts.

VLED surface light source can choose 365 nm, 385 nm, 395 nm, 405 nm wavelength of different power LED, corresponding to different UV glue, UV ink, UV varnish, UV paint, etc., at the same time corresponding to different material requirements

The equipment of point light illuminator of UV LED adopts LED light-emitting mode. It can select different power LEDs of 365, 385, 395 and 405 nm wavelength according to the need to meet the requirements of different UV adhesives on differe