Camera optical component bonding_Futansi (ShangHai)Electronic Technogy Co.,Ltd

Most mobile phone cameras are made up of CMOSs and plastic parts and lenses. In the production process, most mobile phone cameras may be composed of cmos and plastic parts and lenses. During the production process,

May use uvled curing light source, according to different application range, we will choose different uvled curing light source to dry UV glue.

Application of curing light source: The size of the camera of the mobile phone is generally small, and the temperature sensing is also very strong. The uvled curing light source can be cured by 100-200 pieces at a time according to the size of the camera. Under normal circumstances, UV glue

Curing is completed in 5-20 seconds, the temperature is lower than 5 degrees. No external cooling is required, and the shape is small, which is suitable for multiple production methods. In different situations, a variety of different heads can be configured for use.

In the process of mass production of cameras, the current method of many factories is to use a large number of large-scale UV traditional mercury lamp curing equipments for multiple manual or automatic dispensing stations. The noise is large, the dust is large and the power consumption is large.

The effective curing method is actually because the curing component is small, and the utilization rate is very low. For many products, the cleanliness is very high, the temperature requirement is high, and the environmental protection requirements are high. Our improvement is to use UVLED

The surface light source cures the dry UV glue, which is more efficient, energy-saving and environmentally friendly, providing a complete set of perfect solutions for our customers.